10 TUNING THE CHASSIS
10.14
10.15
44
Adjusting the compression damping of the fork
Info
The hydraulic compression damping determines the fork suspension behavior.
H01178-13
Adjusting the rebound damping of the fork
Info
The hydraulic rebound damping determines the fork suspension behavior.
F03633-10
When disconnecting, excess pressure will escape from
the hose – the fork leg itself does not lose any air.
The fork airpump indicator switches off automatically
after 80 seconds.
–
Mount the protection cap.
Info
Only mount the protection cap by hand.
Finishing work
–
Remove the motorcycle from the lift stand. (
–
1
Turn adjuster
clockwise all the way to the stop.
Info
1
Adjuster
is located at the upper end of the right
fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
Guideline
Compression damping
Comfort
Standard
Sport
Info
Turn clockwise to increase damping; turn counter-
clockwise to reduce damping during compression.
–
1
Turn adjuster
clockwise all the way to the stop.
Info
1
Adjuster
is located at the lower end of the right
fork leg.
–
Turn counterclockwise by the number of clicks correspond-
ing to the fork type.
p. 48)
7 clicks
12 clicks
17 clicks