Setting Up Your Wireless Lan (Wlan) - Motorola RSGu3500 User Manual

Setting Up Your Wireless LAN (WLAN)

Caution!
To prevent unauthorized eavesdropping or access to WLAN data, you must enable wireless security. The
default
wireless security.
configuration. Do not attempt to configure the
1
Click the Wireless tab to access the features (Setup, Advanced, Security, Access List, WDS, Restart
Wireless).
2
Click the Enable Wireless box.
3
Enter the Primary SSID information.
4
Select the Channel B/G (1 through 11) from the pull down menu.
5
Select the 802.11 Mode (Mixed, B only B+, G only, G+)
Set the transmission protocol for your WLAN:
Mixed —
B only
B+ 802.11b+
—
G only
6
UNCONTROLLED DOCUMENT Click Save. You must use the Restart Wireless feature in order for your changes to take affect.
RSGu3500 Residential Seamless Mobility Gateway User Guide
Overview Installation Troubleshooting Contact
Configuration: Basic
RSGu3500 settings provide no wireless security. After your WLAN is operational, be sure to enable
Connect at least one computer to the
802.11b/g
802.11b only
—
— 802.11g
FAQ Specifications Glossary License
Advanced TCP/IP
RSGu3500 Ethernet port to perform
RSGu3500 over a wireless connection.
Wireless
95