Connecting The Rsgu3500; Installation - Wired Connection - Motorola RSGu3500 User Manual

Connecting the RSGu3500

A

Installation - Wired Connection

You can connect three additional
computers or devices to your RSGu3500.
Adding routers and hubs allows you
to create an even larger network.
Computer to configure
the RSGu3500
To AC power
UNCONTROLLED DOCUMENT
1
Shut down your computer and unplug your cable or DSL modem power cord or adapter.
2
Disconnect your computer from the modem. Do not disconnect your modem from the cable or phone line that
provides your Internet connection.
Note: Keep your modem off for approximately 10 minutes to clear its memory so it can recognize the
RSGu3500 when you turn it back on.
3
Connect one end of the blue Ethernet cable to the Ethernet port on your modem. Plug the other end to the
blue Ethernet port (labeled Internet) on the rear panel of your residential gateway.
4
Connect one end of the yellow Ethernet cable to the yellow Ethernet port on your residential gateway, and
the other end of the cable to the port on your computer.
5
Plug your cable or DSL modem back into an electrical outlet.
RSGu3500 Residential Seamless Mobility Gateway User Guide
Overview Installation Troubleshooting Contact
Configuration: Basic
FAQ Specifications Glossary License
Advanced TCP/IP
Cable or DSL
You must connect a
phone to the
Phone 1 port
Wireless
Optional phone or fax machine
6