Error Messages - BIO RAD MyCycler Instruction Manual

v-
10.4 Error Messages
Message
Cause
No operations allowed for selected
item. Press Enter key.
Out of range entry corrected to the
nearest valid value!
Infinite time invalid in repeated cycles
Only nine cycles are allowed in a
protocol.
Only nine steps are allowed in a cycle.
No options available for this option.
Note: The previous run had
exceptions. Press Enter key.
Cannot start run. Run currently in
progress. Press Enter key.
There is no available space to save
new protocols! Press Enter key.
No changes are allowed to the
Bio-Rad protocols! Press Enter key.
Error: Name is blank!
Error: Name in use. Please use a
different name. Press Enter key.
Incorrect password entered.
You pressed an inappropriate key for the
selected item.
Time or Temperature values were outside
allowed ranges.
If a cycle is repeated, you may not specify
an infinite dwell time within the cycle.
Programming a protocol with more than
nine cycles
Programming a protocol with a cycle
containing more than nine steps
Pressing the option softkey when neither
a temperature nor time field is selected
Errors were detected in execution of the
last protocol.
A protocol is currently being executed.
The 99 user-defined protocol storage limit
has been reached.
You may not delete or overwrite Bio-Rad
template protocols.
You pressed Enter prior to naming a
protocol.
A protocol with the same name already
exists.
Service Options are for Bio-Rad internal
use only
35