Siemens VersiCharge Installation And Operation Manual page 8

interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
o Reorient or relocate the receiving antenna.
o Increase the separation between the equipment and receiver.
o Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
o Consult the dealer or an experienced radio/TV technician for help.
- Personal Protection Equipment: Use of proper personal protection equipment,
including, but not limited to, eye protection, shock protection, gloves and other
appropriate protection, is recommended when installing or servicing any electrical
equipment
- Charging Circuit Interrupting Device (CCID): The Siemens VersiCharge line of EV
Charging Systems includes a Charging Circuit Interrupting Device (CCID). The CCID
is required by UL Standard 2231 and is designed to detect grounding faults within the
system, and disconnect power from the downstream conductors when a fault is
detected.
- Arcing component in contactor: Siemens VersiCharge EV Charging Systems
include a contactor that, when opened or closed, will cause a short duration arc. The
contactor is enclosed in an appropriate electrical enclosure, but caution if this arc
occurs in the presence of flammable vapors, the vapors could ignite, creating an
explosion. Store flammable vapors away from all electrical equipment, and should
vapors be present, allow sufficient time for ventilation before operating this
equipment.
should be taken when servicing.
DANGER
not be exposed to flammable vapors. This equipment should be installed at least 18
inches above floor or ground level. Use extreme caution and follow instructions
carefully.
8
Explosion hazard. This equipment has arcing or sparking parts that should
©
813776