Amperage Adjustment - Siemens VersiCharge Installation And Operation Manual

3.5 Amperage Adjustment

The Siemens VersiCharge has the option to set the maximum amperage/power
that can be delievered to the car using the Amperage adjustment switch. Note
that Versicharge cannot control the power draw to the EV, it can only
communicate the current capacity of the device to the EV.
Note: The EV controls the power draw. the VersiCharge only communicates the
maximum available power to EV.
Dial Settings

Amperage adjustment dial is for use by a qualified technician only

Purpose of the amperage adjustment dial is to limit the max power that can
be delivered by the charging station.

The dial has 10 settings
o 0-4 are for amperage adjustments
o Settings 5-9 are for factory use only. These settings will result in a fault if
used.

Verify that the VersiCharge is disconnected from power when changing the
amperage adjustment dial
Setting
Label
Current (A)
21
0 1
MIN 25%
6 7.5
©
2 3
50% 75%
15 22.5
4
MAX
30
813776