Device States - Siemens VersiCharge Installation And Operation Manual

2.6 Device States

EVSE's do not have the capability to determine whether your car has been charged or not, refer to car
manual for indication of car battery status.
State Description
Name
Power 240V or 208V Power Present
Available
Ready to EV detected, waiting for
Charge charging command from EV
Charging Charging EV
Pause* Operation paused
Delay Operation awaiting delay
Timer timer
Remote System is controlled via
remote control interface
Some EV's may initiate a delay of charge when exiting out of the 'Pause' state before the EV starts
*
telling the VersiCharge to start charging again. Please refer to the user manual for the EV for further
information.
Further combinations of indicators on the unit are described in the Fault code section 4.3.
13
Indicator(s)
'Power Available'
'Power Available' and "Ready
'Power Available' and
'Charging'
'Power Available" and
"Pause"
'Power Available' and 'Hour(s)
Delay'
'Power Available' and
'Remote Control Lock'
©
Halo Status
Indicator
Off
Green - Solid
Green - Fading
in and out
Off
Off
Off
813776