Download Print this page

Remote Control Interface - Siemens VersiCharge Installation And Operation Manual

Hide thumbs

Advertisement

State Name
Power Available
Ready to Charge
Charging
Pause
Delay Timer
Remote
Halo Deactvation
The Halo indicator on the versiCharge can be deactivated to marginally lower
power consumption of your device during normal operation. This will prevent the
Halo from illuminating in all states, except the 'Fault' state.
To de/re-activate the Halo:
o Remove the connector from the EV and place in the connector holster
o Verify that the VersiCharge is in the 'Power Available' state by ensuring
that only the 'Power Available' indicator is illuminated
o Press and hold both the 'Pause' and the 'Delay Timer' buttons for 5
seconds. The Halo will blink green three times, and then fade out to off

4.7 Remote Control Interface

The Siemens VersiCharge has a Remote Control Interface that allows charging
to be controlled by an external device. Examples include demand response
switches, building automation systems, digital sensors, etc.
To wire a digital input into the dry contact in the connection area located
inside of the VersiCharge, please refer to the installation section 3.6 of this
manual.
27
Description
240V or 208V Power Present
EV detected, waiting for charging
command from EV
Charging EV
Operation paused
Operation awaiting delay timer
System is controlled via remote control
interface
©
Halo Status
Indicator
Off
Green - Solid
Green - Fading in
and out
Off
Off
Off
813776

Hide quick links:

Advertisement

loading

  Related Manuals for Siemens VersiCharge