Function Setting List (Start Level ; U : User's Mode, S : Service Mode) - JUKI SC-510 Engineer's Manual

(4) Function setting list
No.
Item
Soft start
The number of stitches to be sewn at a low speed when the soft-start
function
function is used at the start of sewing.
1
0 : Soft-start function is not operative.
Material end
Material end sensor function (used in case of without panel).
sensor function
0 : Material end detection function is not operative.
2 1 : After detecting material end, the specified number of stitches
Thread trimming
Thread trimming function by material end sensor (used in case of
function by
without panel).
material end
0 : Automatic thread trimming function after detection of material
3
sensor
1 : After detecting material end, the specified number of stitches
Number of
Number of stitches for material end sensor (used in case of without
stitches for
panel).
4
material end
Number of stitches from detection of material end to stop of the sewing
sensor
machine.
Flicker
Flicker reducing function (If the hand lamp flickers).
5
reducing
0 : Flicker reducing function is not operative.
function
1 : Less effective / 3 : Highly effective
Bobbin thread
Bobbin thread counting function
counting
6 0 : Bobbin thread counting function is not operative.
function
1 : Bobbin thread counting function is operative.
Unit of bobbin Unit of bobbin thread counting down
thread
0 : Count/10 stitches
7
counting down
1 : Count/15 stitches
2 : Count/20 stitches
Number of
Sewing speed of reverse feed stitching
rotation of
8
*
reverse feed
stitching
Thread
Thread trimming prohibiting function (used in case of without panel).
trimming
0 : Thread trimming prohibiting function is not operative.
9
prohibiting
1 : Thread trimming is prohibited.
function
Setting of
Position of needle bar is specified when the sewing machine stops.
needle bar
0 : Predetermined lowest position
stop position
1 : Predetermined highest position
10
when the
sewing
machine stops.
Click sound of
Click sound of key switch mounted on PSC is specified.
key switch
0 : Click is not operative.
11
mounted on
1 : Click is operative.
PSC
Changeover of optional switch.
Optional input/
output setting
12
Function of
Function of prohibiting start of the sewing machine by bobbin thread
prohibiting start
counting
of the sewing
0 : When counting is out (-1 or less) Function of prohibiting start
machine by
13
bobbin thread
1 : When counting is out (-1 or less) Function of prohibiting start of
counter
2 : When counting is out (-1 or less), the sewing machine stops
Counting function of sewing (number of completion of process)
Sewing counter
0 : Sewing counter function is not operative.
14
1 : Sewing counter function is operative.
Function of reverse feed stitching switch is set.
Function of
0 : Normal BTsw
reverse feed
1 : Level input wrapper control and presser synchronizing control
stitching switch
15
2 : Level input wrapper control
3 : Alternate input wrapper control
Function of
Function of alternate vertical dial of LU series is selected.
alternate
0 : Invalid
vertical amount
18
1 : Analog input (analog optional input)
input
2 : Digital input (digital input 2 input)
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time
of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
(Descriptions of setting in this list are the standard values at the time of delivery.)
However, contents of function setting are subject to change for improvement of function and performance without notice.
(Start level ; U : User's mode, S : Service mode)
Description
(No. 4) will be sewn, and the sewing machine will stop.
end is not operative.
(No. 4) will be sewn, and the sewing machine will stop and
perform automatic thread trimming.
(Output of solenoid is prohibited. : Thread trimmer and wiper)
of the sewing machine is not operative.
the sewing machine after thread trimming is operative.
once. Function of prohibiting start of the sewing machine after
thread trimming is operative.
Start
level
U
(Stitches)
U
U
U
(Stitches)
U
U
U
U
150 to 3,000
U
U
U
U
U
U
S
15
− −
Indication of
Setting
range function setting
0 to 9
1
2
0/1
3
0/1
0 to 19
4
0 to 3
5
0/1
6
7
0 to 2
8
1 9
(rpm)
9
0/1
1 0
0/1
0/1 1 1
1 2
0 to 2
1 3
0/1
1 4
1 5
0 to 3
1 8
0/1/2
Ref.
page
0
20
0
20
0
20
20
5
0
20
20
1
0
0 0
0 20
0
20
1 20
21
0
0
1
24
24
0
0
24