JUKI SC-510 Engineer's Manual page 24

(Start level ; U : User's mode, S : Service mode)
No.
Item
Waiting time of Delay time from UP stop to start of reverse revolution at the time of
start of reverse control of reverse revolution to
86
revolution to lift lift needle is set.
needle
Function of Pedal curve is selected. (Improving pedal inching operation)
pedal curve
selection
Number of rotations
87
Tension
It is effective in combination with the machine head provided with
release
tension release function.
* 89
function 0 : Tension release function is ineffective.
1 : Tension release function is effective.
Initial UP stop
Automatic UP stop function is set immediately after turning ON the
position move power.
90
function 0 : OFF
1 : ON
Function of compensating stitching when turning handwheel by hand
Function of
at the time of completion of constant-dimension stitching
prohibiting
compensation 0 : Function of compensating stitching is effective.
1 : Function of compensating stitching is prohibited.
* operation after
91
turning
handwheel by
hand
Function to reduce speed at the time of completion of reverse feed
Function of
stitching at the start of sewing.
reducing speed
0 : Speed is not reduced.
of reverse feed
92
1 : Speed is reduced.
stitching at the
start of sewing
Operation of needle up/down compensating switch is changed after
Function added
turning ON the power or thread trimming.
to needle up/
0 : Normal (needle up/down compensating stitching only)
down
93
compensating 1 : One stitch compensating stitching is performed only when
switch
Test display Display function of input data is set.
0 : OFF
mode
94
1 : ON
Selection of the This function sets the machine head used.
For the details, refer to the data, which are separately described on
sewing
95
the sheet of Selecting procedure
machine head
of the machine head with SC-510 (40027864).
Max. number of rotation of the sewing machine head can be set.
Setting of max.
* Setting varies in accordance with resistance pack to be connected.
number of
96
rotation of the
sewing
machine head
* Do not change the set values with asterisk (*) mark as they are functions for maintenance. If the standard set value set at the time
of delivery is changed, it is in danger of causing the machine to be broken or the performance to be deteriorated.
(Descriptions of setting in this list are the standard values at the time of delivery.)
However, contents of function setting are subject to change for improvement of function and performance without notice.
Description
2
(rpm)
0
aforementioned changeover is made. (Upper stop / upper
stop)
Start
level
S
U
1
Pedal stroke (mm)
U
S
U
U
U
S
S
U
19
− −
Indication of
Setting
range
function setting
0 to 250
8 6
10 (ms)
0/1/2
8 7
8 9
0/1
9 0
0/1
9 1
0/1
9 2
0/1
0/1 9 3
0/1
9 4
9 5
9 6 4
150 to MAX
(rpm)
Ref.
page
34
1 0
34
0
0
0
35
1
35
0
0
35
0
35
35
0 0 0