JUKI SC-510 Engineer's Manual page 19

Specified
No.
1
2
1
2
1 2
* When simultaneously pressing
initial value.
5
3
4
5
3
4
switch 3 and
4. When you want to advance the setting No., press
switch 2 to advance the setting No.
When you want to return the setting No., press
switch 1 to return the setting No.
(Caution)
1. When switch 1 (switch 2) is held
pressing, the setting No. will return (will
advance) continuously.
2. When the setting No. is advanced
(returned), the contents which are before
by one (after by one) will be determined.
So, be careful when changing the
contents (up/down switch is touched).
EXAMPLE) C H A N G I N G
REDUCING FUNCTION (SETTING No. 5)
Press switch 2 five times to set the setting No. to "5".
Existing set value is displayed in LED 5. (Standard is
"0".) Press switch 4 three times to change to "3".
(Caution) Keep pressing switch 4 or switch 3,
and the setting vaue can be changed
continuously.
5. When the change has been completed, press
switch 1 or 2 to specify the changed value.
(Caution)
1. When turning OFF the power before
performing this work, the contents
which have been changed are not
updated.
2. Press switch 1, and screen display will
change to the contents of the setting No.
which is before by one.
3. Press switch 2, and screen display will
change to the contents of next setting
No. After completing the operation, turn
OFF the power and turn ON the power
again to return to the normal operation.
After completing the operation, turn OFF the power
and turn ON the power again to return to the normal
switch 4, the value returns to the
14
− −
T H E F L I C K E R