Sequence Of Start And Input - JUKI SC-510 Engineer's Manual

(2) Sequence of start and input

Start the setting mode and select function No. 66 in accordance with "Setting for functions of SC-510".
When No. 66 is selected, indication below appears.
Program input
(Command input)
End of
program input
Turn OFF the power and re-turn ON the power,
and program inputted to "Pro1" starts operation.
Press + or - key to select program No.
This case is when program No. 1 is selected.
Press or
Press + or - key to select program input.
Press key to move to program input mode.
Press + or - key to select command to be inputted.
(For command input, refer to (3). Command input and (4). Simplified
program command list.)
Press + or - key to select "End" command.
By selecting this command, program input can be ended.
With key, program slips out of input mode.
Program cannot be operated in this indication,
Move to "on" indication with "+" or "-" key.
When "on" indication appears, operation of program 1 is possible.
With key, program slips out of input mode to end input.
41
− −
key to move to program input mode.