Simplex 4007ES Operator's Manual page 9

Alarm Conditions, Continued
Viewing the Alarm Condition
Details:
1. Tap on a desired alarm condition from the Fire Alarm in System screen. That alarm condition can either be a point
or a zone containing a variety of points. A point in alarm is shown as an example.
2. Take the necessary actions, using the buttons available at the point details screen. A pull station point is shown as an
example.
Each alarm condition contains detailed information on the point (or points) that have
triggered it. To access that info:
Fire Alarm in System
First of 1
PULL STATION 1
FIRE ALARM
ACK
1
M1-1-0
PULL STATION 1
M1-1
M1-1
Enable
DEVICE ADDRESS: 2-1
IDNET2 CARD
Disable
UNIT NUMBER: 0 RUI NUMBER: LOCAL
---------------------------------------------------------------------
PRIMARY STATUS
CURRENT DEVICE
DEVICE
PHYSICAL STATE
RAW STATE
ACTIVE STATE
ARMED STATE
ENABLED STATE
9
4007ES Operator's Manual (579-1165)
Date
Time
Date
Alarm Functions Menu
Date
Time
PULL STATION
TYPE: ADRPUL
FIRE ALARM
CORRECT DEVICE
ON-LINE
ABNORMAL
ABNORMAL
OFF
ARMED
ENABLED