Panel Setup - Simplex 4007ES Operator's Manual

Panel Setup

Panel Setup Overview:
Screen Buttons:
Panel Setup
Swap Config
Swap Config:
Swap Config
Show Alternate
Use Alternate
Config Version
Config
Set Time/Date:
Panel Setup
1 2
01 01 01
Day Month Year
4 5
01 : 01 : 01
7 8
Hrs Mins
Sec
0
Touchscreen Calibration:
Panel Setup
Calibrate
Clear
Use the Panel Setup function to modify the configuration of the basic panel components.
Tap on a menu icon to access that option's main screen. Refer to Figure 6 for access levels
required to use each option inside the Panel Setup screen.
Scroll down
Scroll Up
Touchscreen
Set Time/Date
Calibration
Figure 8. Panel Setup Screen
Tap the Swap Config button to access the functions below. These
Date
Time functions allow roll back to the previous versions of the panel firmware.
USER
• Show Alternate Config Version: Tap this button to display the
BUTTON 1
USER
BUTTON 2
USER
• Use Alternate Config Version: Tap this button to install the
BUTTON 3
Tap the Set Time/Date button to access the screen where the date and
Date
Time time displayed at the panel can be updated:
3 1. Press the button that corresponds to either day, month, year, hour,
minute or second.
6
2. Enter a new value using the touchscreen keypad.
9
3. Repeat steps 1 and 2 for the date and time values that remain.
4. Press the Accept button for the new date and time to take effect
immediately.
Tap the Touchscreen Calibration button to access the calibration
Date
Time
screen and adjust the sensitivity of the user interface touchscreen.
Sensitivity
Follow these steps to adjust:
1. Increase or decrease the touchscreen sensitivity by using the Scroll
3x
Up and Scroll Down buttons.
2. Tap the Calibrate button and then tap the "+" signs that appear to
adjust the precision of the touchscreen pressure sensors.
3. Return to the System Menu screen.
18
4007ES Operator's Manual (579-1165)
Accept
Date
Time
Mass USER
Storage BUTTON 1
USER
BUTTON 2
USER
BUTTON 3
previous version of the panel
firmware.
previous version of the panel
firmware.
Continued on next page
Return