How To Set The Fixture; Control Panel - ACME CW-108 User Manual

3. How to Set the Fixture

3.1 Control Panel

1. Function Display: Show the various menus and the selected functions
Function Button:
2. MENU To select the programming functions
3. DOWN To go backward in the selected functions
4. UP To go forward in the selected functions
5. ENTER To confirm the selected functions
LED:
6. DMX On
7. MASTER On
8. SLAVE
On
9. SOUND Flashing
10. Microphone: Receive the Sound to control the fixture.
11. Power Input: Connect to supply mains power for the unit.
12. DMX Input: For DMX512 link, use 3-pin XLR plug cable to input the DMX single.
13. Power Output: Connect to supply mains power for the unit.
DMX input present
Master Mode
Slave Mode
Sound activation
5B
5. DMX 512 Configurations
4/5/7 channels mode:
14B