button and the display will blink. Use DOWN and UP button to change the DMX512 address.
Once the address has been selected, press and keep ENTER button pressed up to when
the display stops blinking or storing automatically one minute later. To go back to the
functions without any change press the MENU button again. If you use please refer to the
following diagram to address your DMX512 channel for the first 4/2 units.
4 channels:
5. DMX512 Configuration
4 channels as a group, please refer to the DMX configuration of 4 channels to control the
other channels.
11-
3. How To Set The Fixture
3.1 Control Panel
1
Display: To show the various menus and the selected functions
LED:
2
On
DMX
3
On
MASTER
4
On
SLAVE
5
Flashing
SOUND
Button:
6
To select the programming functions
MENU
7
To go backward in the selected functions
DOWN
8
To go forward in the selected functions
UP
9
To confirm the selected functions
ENTER
DMX input present
Master Mode
Slave Mode
Sound activation
4-