ACME CW-108 User Manual page 10

(Dimmer 255); select the
(Red), (Green),... (Dimmer), pressing the ENTER button and adjust the
brightness intensity from to
When you selected the (Fade mode), press the ENTER button, and then use the
DOWN and UP button to adjust the fade speed from
(Speed 3: the fastest).
Once you have finished the settings, press the ENTER button to setup or automatically exit
menu mode without any change after one minute. To go back to the last function without any
change press the MENU button.
Sound Mode
Select the , press the ENTER button and the display will blink. Use the DOWN and UP
button to select the (Sound mode on) or
the ENTER button to setup or automatically exit menu mode without any change after one
minute. To go back to the functions without any change press the MENU button
Sound Sense
Select the , press the ENTER button, use the DOWN and UP button to adjust sensitivity
level between (the lowest) and
setup or automatically exit menu mode without any change after one minute. To go back to
the functions without any change press the MENU button.
Blackout mode
Select the , press the ENTER button and use the DOWN and UP button to select the
(blackout) or (normal). Press the ENTER button to setup or automatically exit
menu mode without any change after one minute. To go back to the functions without any
change press the MENU button.
(Color 10), press the ENTER button, and select the
.
(Speed 1, the slowest) to
(Sound mode off). Once select, press
(most sensitive). Press the ENTER button to
9B
LED display
Select the , press the ENTER button and the display will blink. Use the DOWN and UP
button to select (LED display always on) or
exit menu) mode. Once select, press the ENTER button to setup or exit menu mode without
any change after one minute. Back to the functions without any change press the MENU
button again.
Display Inverse
Select the , press the ENTER button and the display will blink. Use the ENTER button to
change the display mode between
good for installing in the ceilings). Press the ENTER button to setup. Back to the functions
without any change press the MENU button.
White Balance
Select the , press the ENTER button and the display will blink. Use DOWN and UP
button to select the (Red),
confirm, then use DOWN and UP button to adjust the value from
ENTER button to store, automatically return to the main functions without any change after
one minute.
Manual Test
Select the , press the ENTER button, and use the DOWN and UP button to select
(Red), (Green) or ... or (strobe), press the ENTER button to confirm and use
the DOWN and UP button to adjust the value. Once select press the ENTER button to setup
or automatically exit menu mode without any change after one minute. To go back to the last
function without any change press the MENU button.
( LED display off 20 seconds after
(Display normal) and (Display Inversion,
(Green) or (Blue), press the ENTER button to
to , press the
10B