Advertisement
7B
control the others to give an automatic, sound activated, synchronized light show. This
function is good when you want an instant show. Any fixture can act as a Master or as a Slave.
2-light show
In slave mode, slave 1 means the unit works as master, slave 2 means 2-light show. In order
to create a great light show, you can set the second unit to slave 2 to get contrast movement
to each other, even if you have two units only.
4.2. Easy Controller (by CA-8)
The easy remote control is used only in master/slave mode. By connecting to
the 1/4" microphone jack of the first unit, you will find that the remote
controller on the first unit will control all the other units for Stand by, Function
and Mode selection
Blackout To blackout all the fixture
Function Strobe
Select Chase
1. Synchronous strobe
2. Two –light strobe
3. Sound strobe
Mode
Sound
Chase
(LED OFF)
(LED ON)
4.3 DMX Controller
Use universal DMX controller to control the units, you have to set the DMX address from 1 to
512 channel so that the units can receive DMX signal.
Press the MENU button up to when the
button and the display will blink. Use the DOWN and UP button to change the DMX512
address. Once the address has been selected, press and keep the ENTER button pressed up to
when the display stops blinking or storing automatically one minute later. To go back to the
functions without any change press the MENU button again.
Select color
Select Fade Speed
Fast
Middle
Slow
Color
Speed
(LED slow blinking)
(LED fast blinking)
is showing on the display. Press the ENTER
12B
Hide quick links:
Advertisement
