Copying A Route - Simrad CS66 Operator's Manual

Simrad CS66

7.8 Copying a route

90
Reversing a route
A route may be reversed by tapping the Reverse Route toolbar
key in the Route Editor window. The waypoints will
immediately be shown in reversed order, both in the Waypoint
table and in the chart.
Save the route as described in page 87.
The route may also be reversed from the Start Voyage dialog.
Refer Starting a voyage, page 98.
Do not reverse an active route!
A route may be copied by opening the route and saving it with a
new name.
Open the Route Editor window by tapping Navigation menu
followed by the Edit command, and select the route that is to be
copied.
If the Route Editor window already is open, the route is
selected by tapping the Route menu followed by the Edit
command.
The route may now be saved with a new name by tapping the
Route menu followed by the Save As command. The Save
Route As dialog will be displayed.
Enter a new name for the route in the New Route field, and
confirm by tapping OK.
20221859 / F