Testing The Alarm System - Simrad CS66 Operator's Manual

11.3 Testing the alarm system

20221859 / F
Indications
These messages inform you of conditions that are noteworthy for
the Operator.
Indication messages are indicated with yellow background color.
Alarms and indicators may be tested by tapping the Setup menu
followed by the System Configuration command.
To prevent unauthorized use of the system configuration entries,
the entry has been password protected. Enter "1234" in the
password field when system setup password is requested, and
confirm by tapping OK.
Select the Misc tab, and tap Alarm Test.
The Attention window will now be activated showing Testing
Alarm, and an audible alarm will sound.
The alarm test will run until the alarm is acknowledged.
AIS alarm messages
If an AIS system is connected to the CS system, the AIS may
send alarm messages to the CS system. For any AIS related
alarms, refer to the separate AIS manual. .
SYSTEM MESSAGES
129