Oscillography - GE D30D00HCHF8AH6AM6BP8BX7A Instruction Manual

6.4 RECORDS
PATH: ACTUAL VALUES
 OSCILLOGRAPHY

This menu allows the user to view the number of triggers involved and number of oscillography traces available. The
value is calculated to account for the fixed amount of data storage for oscillography. See the Oscillog-
CYCLES PER RECORD
raphy section of chapter 5 for additional details.
A trigger can be forced here at any time by setting "Yes" to the
menu for information on clearing the oscillography records.
CLEAR RECORDS
PATH: ACTUAL VALUES
 BREAKER 1

6
There is an identical menu for each of the breakers. The

COMMANDS CLEAR RECORDS
defined as the slowest operating time of breaker poles that were initiated to open.
6-22
 
RECORDS

OSCILLOGRAPHY

FORCE TRIGGER?
No
NUMBER OF TRIGGERS:
MESSAGE
0
AVAILABLE RECORDS:
MESSAGE
0
CYCLES PER RECORD:
MESSAGE
0.0
LAST CLEARED DATE:
MESSAGE
2000/07/14
 
RECORDS MAINTENANCE
BKR 1 ARCING AMP φA:
0.00 kA2-cyc
BKR 1 ARCING AMP φB:
MESSAGE
0.00 kA2-cyc
BKR 1 ARCING AMP φC:
MESSAGE
0.00 kA2-cyc
BKR 1 OPERATING TIME
MESSAGE
φA:
BKR 1 OPERATING TIME
MESSAGE
φB:
BKR 1 OPERATING TIME
MESSAGE
φC:
BKR 1 OPERATING
MESSAGE
TIME:
menu for clearing breaker arcing current records. The
D30 Line Distance Protection System
Range: No, Yes
15:40:16
FORCE TRIGGER?

BREAKER 1(2)
0 ms
0 ms
0 ms
0 ms
values are in units of kA
BKR 1 ARCING AMP
6 ACTUAL VALUES
6.4.3 OSCILLOGRAPHY
command. Refer to the
COMMANDS
6.4.4 BREAKER MAINTENANCE
2
-cycles. Refer to the
BREAKER OPERATING TIME

is
GE Multilin