Table of Contents
Advertisement
2.2 SPECIFICATIONS
SOLID-STATE OUTPUT RELAY
Operate and release time: <100 μs
Maximum voltage:
Maximum continuous current: 5 A at 45°C; 4 A at 65°C
Make and carry:
for 0.2 s:
for 0.03 s
2
Breaking capacity:
UL508
Operations/
5000 ops /
interval
1 s-On, 9 s-Off
1000 ops /
0.5 s-On, 0.5 s-Off
Break
3.2 A
capability
L/R = 10 ms
(0 to 250 V
1.6 A
DC)
L/R = 20 ms
0.8 A
L/R = 40 ms
RS232
Front port:
RS485
1 rear port:
Typical distance:
Isolation:
ETHERNET (FIBER)
PARAMETER
FIBER TYPE
100MB MULTI-
Wavelength
1310 nm
Connector
Transmit power
–20 dBm
Receiver sensitivity
–30 dBm
Power budget
Maximum input
–14 dBm
power
Typical distance
Duplex
Redundancy
ETHERNET (10/100 MB TWISTED PAIR)
Modes:
Connector:
SIMPLE NETWORK TIME PROTOCOL (SNTP)
clock synchronization error: <10 ms (typical)
2-18
265 V DC
30 A as per ANSI C37.90
300 A
Utility
Industrial
application
application
(autoreclose
scheme)
5 ops /
0.2 s-On,
10000 ops /
0.2 s-Off
0.2 s-On,
within 1
30 s-Off
minute
10 A
10 A
L/R = 40 ms
L/R = 40 ms
19.2 kbps, Modbus RTU
Up to 115 kbps, Modbus RTU, DNP 3
1200 m
2 kV, isolated together at 36 Vpk
MODE
LC
10 dB
2 km
full/half
yes
10 MB, 10/100 MB (auto-detect)
RJ45
D30 Line Distance Protection System
2 PRODUCT DESCRIPTION
CONTROL POWER EXTERNAL OUTPUT
(FOR DRY CONTACT INPUT)
Capacity:
100 mA DC at 48 V DC
Isolation:
±300 Vpk
REMOTE OUTPUTS (IEC 61850 GSSE/GOOSE)
Standard output points: 32
User output points:
32
DIRECT OUTPUTS
Output points:
32
DCMA OUTPUTS
Range:
–1 to 1 mA, 0 to 1 mA, 4 to 20 mA
Max. load resistance:
12 kΩ for –1 to 1 mA range
12 kΩ for 0 to 1 mA range
600 Ω for 4 to 20 mA range
Accuracy:
±0.75% of full-scale for 0 to 1 mA range
±0.5% of full-scale for –1 to 1 mA range
±0.75% of full-scale for 0 to 20 mA range
99% Settling time to a step change: 100 ms
Isolation:
1.5 kV
Driving signal:
any FlexAnalog quantity
Upper and lower limit for the driving signal: –90 to 90 pu in steps of
0.001
2.2.8 COMMUNICATION PROTOCOLS
PRECISION TIME PROTOCOL (PTP)
PTP IEEE Std 1588 2008 (version 2)
Power Profile (PP) per IEEE Standard PC37.238TM2011
Slave-only ordinary clock
Peer delay measurement mechanism
OTHER
TFTP, HTTP, IEC 60870-5-104, Ethernet Global Data (EGD)
GE Multilin
Advertisement
Table of Contents
