Control Pushbuttons - GE D30D00HCHF8AH6AM6BP8BX7A Instruction Manual

5.2 PRODUCT SETUP

PATH: SETTINGS PRODUCT SETUP
 CONTROL
 PUSHBUTTON 1
There are three standard control pushbuttons, labeled USER 1, USER 2, and USER 3, on the standard and enhanced front
panels. These are user-programmable and can be used for various applications such as performing an LED test, switching
setting groups, and invoking and scrolling though user-programmable displays.
Firmware revisions 3.2x and older use these three pushbuttons for manual breaker control. This functionality has been
retained – if the breaker control feature is configured to use the three pushbuttons, they cannot be used as user-program-
mable control pushbuttons.
The location of the control pushbuttons are shown in the following figures.
5
An additional four control pushbuttons are included on the standard faceplate when the D30 is ordered with the twelve
user-programmable pushbutton option.
Control pushbuttons are not typically used for critical operations and are not protected by the control password. However,
by supervising their output operands, the user can dynamically enable or disable control pushbuttons for security reasons.
Each control pushbutton asserts its own FlexLogic operand. These operands should be configured appropriately to perform
the desired function. The operand remains asserted as long as the pushbutton is pressed and resets when the pushbutton
is released. A dropout delay of 100 ms is incorporated to ensure fast pushbutton manipulation will be recognized by various
features that may use control pushbuttons as inputs.
An event is logged in the event record (as per user setting) when a control pushbutton is pressed. No event is logged when
the pushbutton is released. The faceplate keys (including control keys) cannot be operated simultaneously – a given key
must be released before the next one can be pressed.
5-60


CONTROL PUSHBUTTONS

CONTROL PUSHBUTTON 1
FUNCTION: Disabled
CONTROL PUSHBUTTON 1
MESSAGE
EVENTS: Disabled
Figure 5–7: CONTROL PUSHBUTTONS (ENHANCED FACEPLATE)
STATUS EVENT CAUSE
IN SERVICE VOLTAGE
TROUBLE CURRENT
TEST MODE FREQUENCY
TRIP OTHER
ALARM PHASE A
PICKUP PHASE B
PHASE C
NEUTRAL/GROUND
Figure 5–8: CONTROL PUSHBUTTONS (STANDARD FACEPLATE)
D30 Line Distance Protection System
5.2.11 CONTROL PUSHBUTTONS

CONTROL PUSHBUTTON 1(7)
Range: Disabled, Enabled
Range: Disabled, Enabled
Control pushbuttons
842813A1.CDR
RESET
THREE
USER 1
STANDARD
USER 2
CONTROL
PUSHBUTTONS
USER 3
USER 4
FOUR EXTRA
USER 5
OPTIONAL
USER 6
CONTROL
PUSHBUTTONS
USER 7
842733A2.CDR
5 SETTINGS
GE Multilin