GE MDS SD4A Technical Manual page 87

Verify Image
Copy Image
MDS 05-4846A01, Rev. F
This screen is used to verify the integrity of an image stored in flash
memory. You may wish to verify an image after reprogramming or as
part of a troubleshooting sequence.
Verify
• —Click this button to verify the firmware image selected in
the drop-down box at the top of the screen. The available selec-
tions from the box are:
Inactive image
.
Active Image
• —Shows the firmware package currently being used
by the transceiver (1 or 2).
Package 1
• —Shows the version of firmware package 1.
Package 2
• —Shows the version of firmware package 2.
Copy
• —Click this button to copy the currently running firmware to
the inactive image.
This screen may be updated on demand by clicking the
It may also be refreshed automatically by clicking the
time (in seconds) may be entered for automatic refresh in the box to the
Auto
right of the button.
SD Series Technical Manual
Current active image Image 1
,
Image 2
, , and
Refresh
button.
Auto
button. A
79