GE MDS SD4A Technical Manual page 45

MDS 05-4846A01, Rev. F
Table 11. Common Tasks with Device Manager (Continued)
Task
If you wish to...
Category
Set RF Output Power, Modem Type, RX/TX
Frequency
View/Set Soft-Carrier Dekey status, RX/TX
Time-Out options
Data-Key and RTS-Key settings (ON/OFF)
Push-to-Talk/Clear-to-Send Delay times (ms)
Automatic Frequency Correction (AFC) setting
Switched Carrier ON/OFF setting (B Modems)
Configure Listen-Before-Transmit (LBT)
collision avoidance
View Received Signal Strength (RSSI) level
Key the radio transmitter, view power output
Monitor local radio emissions for possible
interference
SD Series Technical Manual
Refer to this Screen
Configuration>>Radio,
Basic Settings, Page 41
Configuration>>
Radio>>
Advanced Settings, Page 48
Configuration>>
Radio>>
Advanced Settings, Page 48
Configuration>>
Radio>>
Advanced Settings, Page 48
Configuration>>
Radio>>
Advanced Settings, Page 48
Configuration>>
Radio>>
Advanced Settings, Page 48
Configuration>>
Features>>
LBT Settings, Page 51
Maintenance & Status>>
Performance, Page 71
Maintenance & Status>>
Radio Test>>
RF Keying Test, Page 75
Maintenance & Status>>
Radio Test>>
Spectrum Graph, Page 75
37