Removing The Chassis Cover - DFI KS070-AL Installation Manual

Removing the Chassis Cover

1. Make sure the system and all other peripheral devices connected to it
have been powered-off.
2. Disconnect all power cords and cables.
3. The 12 mounting screws on the top and bottom as well as both sides of
the system are used to secure the cover to the chassis. Remove these
screws and put them in a safe place for later use.
4. Lift the cover up to open the system.
5. The Mini PCIe and the M.2 sockets are readily accessible after removing
the chassis cover.
M.2 socket
Mounting screw
Mounting screw
Mounting screw
4
Mini PCIe socket