Usage - Otto Bock B400b400 Instructions For Use Manual

Usage

6 Usage
6.1 Side panels
INFORMATION
For additional information on side panels with lighting: see
Page 48.
Removing the side panel
1) Loosen the wing screw on the side panel holder (see
Fig. 7, arrow).
2) Pull the side panel out from the side panel holder and
set it aside.
3) Only for side panel with control panel:
→ Carefully let the side panel with the control panel
hang down while getting in.
→ For transporting the power wheelchair, place the
side panel on the seat.
INFORMATION: If necessary, the hook-and-loop
closures for routing the control panel cable can
be undone and the control panel can be
removed.
18 | Ottobock
Fig. 7 Removing the side panel
Installing the side panel
1) If necessary, install the control panel and fasten the
hook-and-loop closures for routing the control panel
cable.
2) Insert the side panel into the side panel holder.
3) Re-tighten the wing screw on the side panel holder.
6.2 Footrests
CAUTION
Exposed pinch points
Pinching, crushing of fingers
► Ensure that your fingers are not in the danger area
when flipping the footrests up or down.
B400