Configuring Wps - Cisco RV215W Administration Manual

Configuring the Wireless Network

Configuring WPS

Configuring WPS
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
Configure WPS to allow WPS-enabled devices to easily and securely connect to
the wireless network. Refer to your client device documentation for additional
instructions on setting up WPS on your client device.
To configure WPS:
Choose Wireless > WPS. The Wi-Fi Protected Setup page appears
Select the wireless network on which to enable WPS from the SSID drop-down
menu.
Check WPS Enable to enable WPS. To disable WPS, uncheck the box.
Configure the WPS on client devices in one of the following three ways:
a. Click or press the WPS button on the client device and click the WPS icon on
this page.
b. Enter the WPS PIN number of the client and click Register.
c. A client device requires a PIN number from this router, use the router PIN
number indicated.
After you configure WPS, the following information appears at the bottom of the
WPS page: Wi-Fi Protected Setup Status, Network Name (SSID), and Security.
3
70