Editing The Wireless Network Settings - Cisco RV215W Administration Manual

Configuring the Wireless Network
Configuring Basic Wireless Settings
STEP 7
STEP 8
STEP 9
STEP 1
STEP 2
STEP 3
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
If you create additional VLANs, choose a value that corresponds with the VLAN
configured on other switches in the network. This is done for security purposes.
You might need to change the management VLAN to limit access to the Device
Manager.
(Optional) In the U-APSD (WMM Power Save) field, check Enable to enable the
Unscheduled Automatic Power Save Delivery (U-APSD) feature, also referred to as
WMM Power Save, that allows the radio to conserve power.
U-APSD is a power saving scheme optimized for real-time applications, such as
VoIP, transferring full-duplex data over WLAN. By classifying outgoing IP traffic as
Voice data, these types of applications can increase battery life by approximately
25% and minimize transmit delays.
(Optional) Configure the settings of the four wireless networks (see
Wireless Network Settings).
Click Save.

Editing the Wireless Network Settings

The Wireless Table in the Basic Settings page (Wireless > Basic Settings) lists
the settings of the four wireless networks supported on the Cisco RV215W.
To configure wireless network settings:
Check the box for the networks you want to configure.
Click the Edit button.
Configure these settings:
Enable SSID
SSID Name
SSID Broadcast
VLAN
Click On to enable the network.
Enter the name of the network.
Check this box to enable SSID broadcast. If
SSID broadcast is enabled, the wireless router
advertises its availability to wireless-equipped
devices in the range of the router.
Choose the VLAN associated with the network.
3
Editing the
58