Cisco RV215W Administration Manual page 123

Administering Your
Configuring Logging
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
To configure the e-mailing of logs:
Choose Administration > Logging > E-mail Settings.
To enable the e-mailing of log events, check Enable.
The minimum email log severity of logs you want to capture appears. To change
this, click Configure Severity.
Configure the following settings:
E-mail Server Address
E-mail Server Port
Return E-mail Address
Send to E-mail
Address (1)
Send to E-mail
Address (2) (Optional)
Send to E-mail
Address (3) (Optional)
E-mail Encryption (SSL)
Authentication with
SMTP Server
E-mail Authentication
Username
Enter the address of the SMTP server. This is the
mail server associated with the email account
you've setup (for example,
mail.companyname.com
Enter the SMTP server port. If your email provider
requires a special port for email, enter it here.
Otherwise, use the default (25).
Enter the return email address that the
Cisco RV215W will send messages to if logs from
the router to the send-to email address are
undeliverable.
Enter an email address to which to send logs (for
example, logging@companyname.com
Enter an additional email address to which to send
logs.
Enter an additional email address to which to send
logs.
To enable email encryption, check Enable.
If the SMTP (mail) server requires authentication
before accepting connections, choose the type of
authentication from the drop-down menu: None,
LOGIN, PLAIN, and CRAM-MD5.
Enter the email authentication username (example,
logging@companyname.com).
).
).
7
117