Chapter 6: Configuring Quality Of Service (Qos); Configuring Bandwidth Management; Configuring Bandwidth - Cisco RV215W Administration Manual

Configuring Quality of Service (QoS)

Configuring Bandwidth Management

STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
You can use the Cisco RV215W bandwidth management feature to manage the
bandwidth of the traffic flowing from the secure network (LAN) to the insecure
network (WAN).

Configuring Bandwidth

You can limit the bandwidth to reduce the rate at which the Cisco RV215W
transmits data. You can also use a bandwidth profile to limit the outbound traffic,
thus preventing the LAN users from consuming all of the bandwidth of the Internet
link.
To set the upstream and downstream bandwidth:
Choose QoS > Bandwidth Management.
In the Bandwidth Management field, check Enable. The maximum bandwidth
provided by your ISP appears in the Bandwidth section.
In the Bandwidth Table, enter the following information for the WAN interface:
Upstream
Downstream
Click Save.
The bandwidth (kb/s) used for sending data to the
Internet.
The bandwidth (kb/s) used for receiving data from
the Internet.
6
102