Configuring Access Rules - Cisco RV215W Administration Manual

Configuring the Firewall

Configuring Access Rules

Configuring Access Rules
STEP 1
STEP 2
STEP 3
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
Configuring the Default Outbound Policy
The Access Rules page allows you to configure the default outbound policy for
the traffic that is directed from the secure network (LAN) to the non-secure
network (dedicated WAN/optional).
The default inbound policy for traffic flowing from the non-secure zone to the
secure zone is always blocked and cannot be changed.
To configure the default outbound policy:
Choose Firewall > Access Rules.
Choose Allow or Deny.
Note: Ensure that IPv6 support is enabled on the to configure an IPv6 firewall. See
Configuring IPv6.
Click Save.
Reordering Access Rules
The order in which access rules are displayed in the access rules table indicates
the order in which the rules are applied. You may want to reorder the table to have
certain rules applied before other rules. For example, you may want to apply a rule
allowing certain types of traffic before blocking other types of traffic.
To reorder access rules:
Choose Firewall > Access Rules.
Click Reorder.
Check the box in the row of the rule that you want to move up or down and click
the up or down arrow to move the rule up or down one line, or select the desired
position of the rule in the drop-down list and click Move to.
Click Save.
4
78