Configuring Date And Time Settings - Cisco RV215W Administration Manual

Administering Your

Configuring Date and Time Settings

STEP 4
Configuring Date and Time Settings
STEP 1
STEP 2
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
You can enable Bonjour on specific VLANs. Enabling Bonjour on a VLAN allows
devices present on the VLAN to discover Bonjour services available on the router
(such as http/https).
For example, if a VLAN is configured with an ID of 2, devices and hosts present on
VLAN 2 cannot discover Bonjour services running on the router unless Bonjour is
enabled for VLAN 2.
Click Save.
You can configure your time zone, whether or not to adjust for Daylight Savings
Time, and with which Network Time Protocol (NTP) server to synchronize the date
and time. The router then gets its date and time information from the NTP server.
To configure NTP and time settings:
Choose Administration > Time Settings. The current time is displayed.
Configure this information:
Time Zone
Adjust for Daylight
Savings Time
Daylight Saving Mode
Daylight Saving Offset
Set Date and Time
Select your time zone, relative to Greenwich Mean
Time (GMT).
If supported for your region, check the Adjust for
Daylight Savings Time box.
This check box is enabled if you click Auto in the
Set Date and Time field below.
Choose either By date (you enter the specific date
on which daylight saving mode starts) or Recurring
(you enter the month, week, day of week, and time
on which daylight saving time starts). Enter the
appropriate information in the "from" and "to" fields.
Choose the offset from Coordinated Universal
Time (UTC) from the drop-down menu.
Select how to set the date and time.
7
119