Configuring The E-Mailing Of Logs - Cisco RV215W Administration Manual

Administering Your
Configuring Logging
STEP 5
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
Log Severity for Local
Log and Email
Enable
Click Save.
To edit an entry in the Logging Setting Table, select the entry and click Edit. Make
your changes, then click Save.

Configuring the E-Mailing of Logs

You can configure the Cisco RV215W to send logs by email. We recommend that
you set up a separate email account for sending and receiving logs.
You must first set up the severity of logs you want to capture; see
Logging Settings.
Click to choose the severity of logs you want to
configure. Note that all log types above a selected
log type are automatically included and you cannot
deselect them. For example, choosing "error" logs
automatically includes emergency, alert, and
critical logs in addition to error logs.
The event severity levels are listed from the highest
severity to the lowest severity, as follows:
• Emergency—System is not usable.
• Alert—Action is needed.
• Critical—System is in a critical condition.
• Error—System is in error condition.
• Warning—System warning occurred.
• Notification—System is functioning
properly, but a system notice occurred.
• Information—Device information.
• Debugging—Provides detailed information
about an event. Choosing this severity uses
large amounts of logs to be generated and is
not recommended during normal router
operation.
To enable these logging settings, check this box.
7
Configuring
116