Cisco RV215W Administration Manual page 9

Getting Started
Connecting to Your Wireless Network
Connecting to Your Wireless Network
STEP 1
STEP 2
STEP 3
STEP 4
Cisco RV215W Wireless-N VPN Firewall Administration Guide
Draft Version 1—Cisco Confidential
To connect a device (such as a computer) to your wireless network, configure the
wireless connection on the device with the wireless security information you
configured for the Cisco RV215W by using the Setup Wizard.
The following steps are provided as an example; it might be necessary to
configure your device differently. For instructions that are specific to your device,
consult its documentation.
Open the wireless connection settings window or program for your device.
Your computer might have special software installed to manage wireless
connections, or you might find the wireless connections under the Control Panel in
the Network Connections or Network and Internet window. (The location
depends on your operating system.)
Enter the network name (SSID) you chose for your network in the Setup Wizard.
Choose the type of encryption and enter the security key that you specified in the
Setup Wizard.
If you did not enable security (not recommended), leave the wireless encryption
fields that were configured with the security type and passphrase blank.
Verify your wireless connection and save your settings.
1
3