Table of Contents
Advertisement
4)
Set the filtering level in which the stable indication turns on .The higher the
setting, the slower stabilization time. Options are Fil 1,Fil 2,Fil 4 and Fil 8.
5)
Set the period of inactivity before the scale automatically turns off. Options are
Aut.NO=non power-off,Aut.5, Aut.10, Aut.30 and Aut.60(minutes).
6)
Set the activation mode of backlight. Options are lit.Aut=Auto on with items
greater than 9d placed on the weighing pan, lit.ON = Backlight on and lit.OFF=Backlight off.
7)
Set zero display range. Options are Zero.0(one division) , Zero.1(2 divisions),
Zero.2(3 divisions), Zero.3(4 divisions), Zero.4(5 divisions) and Zero.5(6 divisions) .
8)
Set RS-232 Serial Transmission Rate. Options are bAu.96(9600), bAu.48(4800)
and bAu.24(2400)
9)
Set Print mode .Options are Prt.Pr(manual print), Prt.St(Stable print) and
Prt.Co(Continuous print)
Note:
In the continuous print mode, computer will be automatic chosen as the external
device.
→
10)
Set external Interface. Options are PC, SH, ZEBRA,TP, AX, EZ2-S and
tdp-643.
11)
Set Weight checking memory.
12)
Set Weight checking buzzer beep. Options are beep.Un, beep.IN, beep.NO
and beep.LO.
13)
Set
RTC Function.
8. Serial Interface
If external interface is needed, please select the proper two-in-one board first, which
integrates RTC (time display), RS-232 and relay (weight checking) functional module onto
one circuit board. Only after this board is adopted, the three functions can be realized.
(Enable);
(Enable);
(Disable)
JWE
(Disable )
9
Hide quick links:
Advertisement
Table of Contents
