Initial Setup; Using The Administrator Console; Log On - 8e6 Technologies R3000 User Manual

I S
NTRODUCTORY ECTION
Chapter 4: Getting Started

Initial Setup

Using the Administrator Console

48
C 4: G
HAPTER ETTING
To initially set up your R3000 server, follow the instructions
in the R3000IR Quick Start Guide, the booklet packaged
with your R3000IR unit. This guide explains how to perform
the initial configuration of the server so that it can be
accessed via an IP address on your network.
NOTE: If you do not have the R3000IR Quick Start Guide, contact
8e6 Technologies immediately to have a copy sent to you.

Log On

1. Launch a browser window supported by the R3000.
2. In the address line of the IE browser window, type in the
R3000 server's IP address appended by the following
port number:
• ":88" for an HTTP address
• ":1443" for an HTTPS address
For example, if your IP address is 210.10.131.34, type in
http://210.10.131.34:88 or https://210.10.131.34:1443.
3. Click Go to open the R3000 Introductory Window:
S
TARTED
8 6 T , R3000 E
E ECHNOLOGIES
F U G
NTERPRISE ILTER SER UIDE