Range To Detect Window - 8e6 Technologies R3000 User Manual

Enterprise filter

Hide thumbs Also See for R3000:

Table of Contents

DMINISTRATOR

Range to Detect window

The Range to Detect window displays when Range to

Detect is selected from the Global Group menu. This

window is used for defining segments of network traffic to be

detected by the R3000 in the invisible or router mode.

Service ports that should be open—ignored by the R3000—

are also defined in this window.

Fig. 2:2-3 Range to Detect Settings window, main window

NOTES: Segments of network traffic should not be defined if

using the firewall mode.

This window is disabled if using the mobile mode.