Set Up An R3000 To Be A Target Server - 8e6 Technologies R3000 User Manual

Enterprise filter

Hide thumbs Also See for R3000:

Table of Contents

Set up an R3000 to be a Target Server

An R3000 configured to be a target server will receive

profile/library setting changes from the source server only.

WARNING: If an R3000 server is set up in the Target mode with a

NAT device between the target and source server, be sure that

ports 26262 and 26268 are open on the target server. This setup

is required so that the target server can communicate with the

source server.

For the Target mode setting:

1. In the Mode frame, click "Target" to display the Target

Fig. 2:1-59 Setup window, Target mode

DMINISTRATOR

YSTEM SCREEN