Modify The Nic Mode Setting - 8e6 Technologies R3000 User Manual

Enterprise filter

Hide thumbs Also See for R3000:

Table of Contents

Modify the NIC Mode Setting

WARNING: If changing the NIC mode, be sure the hub/switch to

which the R3000 is connected will support the selected NIC

mode. An incorrect setting may prevent you from accessing the

R3000 console.

To modify the NIC setting, in the LAN1 or LAN2 frame:

1. Click the radio button for the available option you wish to

2. Click Apply to activate the new NIC mode setting.

NOTE: The status (Up or Down) of the Interface displays to the

right of the LAN1 and LAN2 labels. For an Interface with an "Up"

status, the Link status (Up or Down) displays to the right of the

Interface status.

select: 10baseT-Full Duplex, 10baseT-Half Duplex,

100baseT- Full Duplex, 100baseT-Half Duplex, or

1000baseT-Full Duplex, if available on your R3000

model (see NIC Mode Speeds Chart).

DMINISTRATOR

YSTEM SCREEN