Verify Smtp Settings - 8e6 Technologies R3000 User Manual

G A
LOBAL DMINISTRATOR
132
S C 1: S
ECTION HAPTER
3. By default, the Email queue size is 50. This can be
changed to specify the maximum number of requests
that can be placed into the queue awaiting an available
outbound connection.
4. By default, Authentication is disabled. Click "Enable" if
a username and password are required for logging into
the SMTP server. This action activates the fields below.
Make the following entries:
a. Enter the Username.
b. Enter the Password and make the same entry in the
Confirm Password field.
5. Click Apply to apply your settings.

Verify SMTP Settings

To verify that email messages can be sent to a specified
address:
1. Click Test Settings to open the pop-up box:
Fig. 2:1-39 SMTP Test Settings box
2. Enter the email address in the pop-up box.
3. Click OK to close the pop-up box and to process your
request. If all SMTP Server Settings are accepted, the
test email should be received at the specified address.
YSTEM SCREEN
8 6 T , R3000 E
E ECHNOLOGIES
F U G
NTERPRISE ILTER SER UIDE