Configuration; Enable Real Time Probes; Set Up Real Time Probes; Exclude An Ip Address From Real Time Probing - 8e6 Technologies R3000 User Manual

Configuration

Enable Real Time Probes

1. On the Configuration tab, click "On".
2. Click Save to enable the Real Time Probes feature. As a

Set up Real Time Probes

1. Enter the Maximum Probes to Run/Schedule Simulta-
2. Enter the Maximum Probes that can be Scheduled,
3. Enter the Maximum Run Time in Minutes the probe will
4. Enter the Maximum Report Lifetime in Days to keep a
5. Click Save.

Exclude an IP Address from Real Time Probing

1. Enter the Excluded IP Address of a machine to be
2. Click Add to add the IP address in the Current White list
8 6 T , R3000 E
E ECHNOLOGIES
G
LOBAL
result, all elements in this window become activated.
neously, up to 99 probes. The default setting is 10
probes.
equal to or less than the maximum probes that can run at
the same time. The default setting is 5 probes.
search for URLs, up to 1440 minutes (24 hours). The
default setting is 1000 minutes.
saved report before deleting it. The default setting is 7
days.
bypassed from real time probing.
of IPs.
F U
NTERPRISE ILTER SER
A S
DMINISTRATOR ECTION
G
UIDE
C 4: R
HAPTER EPORTING SCREEN
323