I Nstall The S Erver; Step 1: Setup Procedures - 8e6 Technologies R3000 Quick Start Manual

I
nstall the

Step 1: Setup Procedures

this step requires you to link the workstation to the R3000. You have the option of using
the text-based Quick Start setup procedures described in Step 1A, or the Administrator
console setup procedures described in Step 1B.
Quick Start Setup Requirements
the following hardware can be used for the Quick Start setup procedures:
• R3000 with AC power cord
• either one of two options:
• PC monitor with AC power cord and keyboard, or
• PC laptop computer with Hyperterminal and serial port cable (and USB DB9 se-
rial adapter, if there is no serial port on your laptop)
Go to Step 1A to execute Quick Start Setup Procedures.
Administrator Console Setup Requirements
if your R3000 chassis is a 1U unit, the following hardware is required for the Administra-
tor console setup procedures:
• R3000 1U unit with AC power cord
• CAt-5e crossover cable
• PC laptop computer, or PC monitor with AC power cord and keyboard
if your R3000 chassis is a mini tower unit, the following hardware is required for the Ad-
ministrator console setup procedures:
• R3000 mini tower unit with AC power cord
• CAt-5e crossover cable
• PC laptop computer
Go to Step 1B to execute Console Setup Procedures.
8 6 R3000 Q S G
e uick taRt uide
s
eRveR