Top Cpu Processes; Nic Configuration; Active Connections; Routing Table - 8e6 Technologies R3000 User Manual

G A S C 1: S
LOBAL DMINISTRATOR ECTION HAPTER YSTEM SCREEN

TOP CPU processes

The TOP CPU processes diagnostic tool is used for
analyzing how much memory and CPU power is being
consumed by which processes. When Execute is clicked,
the pop-up window displays the following information: the
load average, number of processes that can run, current
utilization by CPUs on the system, and memory and swap
file space currently being used and currently available. A
row of statistics displays for each process utilizing the most
resources on the system.

NIC configuration

NIC Configuration is used for verifying the server's network
interface configuration at bootup. When Execute is clicked,
information about the NIC mode and RX packets and TX
packets displays in the pop-up window.

Active connections

When Active Connections is selected and Execute is
clicked, information about opened connections displays in
the pop-up window. The first half of the results includes
packet traffic data on configured network interfaces. The
second half of the results includes a list of active UNIX
domain sockets for each protocol.

Routing table

When Routing Table is selected and Execute is clicked,
information about available routes and their statuses
displays in the pop-up window. Each route consists of a
destination host or network and a gateway to use in
forwarding packets.
113
8 6 T , R3000 E F U G
E ECHNOLOGIES NTERPRISE ILTER SER UIDE