Specify The Shadow Log Format; Auto-Detect Option - 8e6 Technologies R3000 User Manual

Specify the Shadow Log Format

The window is comprised of the Log Format frame
containing radio buttons corresponding to the following
options: "Auto-detect", "Post 2.0 log format (manual)", "Post
1.9 log format (manual)", and "Pre 1.9 log format (manual)".
WARNING: When making a selection in this window, be sure to
first identify the software versions currently being used by the
R3000 and the ER. A correct selection in this window is critical,
since the table structure of the ER has changed since software
versions 4.0 and 3.50. The ER table structure in software release
4.1 and higher is compatible with R3000 software version 2.0 and
higher, and the ER table structure in software release 3.75 and
higher (up until 4.1) is compatible with R3000 software version
1.9 and higher (up until 2.0).

Auto-detect option

By default, "Auto-detect" is selected. Using this option, the
R3000 will search for a connection to an ER and identify the
software version of the software update applied to that appli-
ance.
Status:
• Active - displays by default, or if the ER is using a soft-
• Inactive - displays by default if the ER is using software
Log Format:
• Post 1.9 log format - displays by default if the ER is using
• Post 2.0 log format - displays by default if the ER is using
8 6 T , R3000 E
E ECHNOLOGIES
G
LOBAL
ware version prior to 4.1
version 4.1 or later, or if an ER is not connected to the
R3000
software version 3.75 or later (up until 4.1), or if an ER is
not connected to the R3000
software version 4.1 or later
F U
NTERPRISE ILTER SER
A S
DMINISTRATOR ECTION
G
UIDE
C 4: R
HAPTER EPORTING SCREEN
341