Add Individual Ip; Add An Individual Ip Member - 8e6 Technologies R3000 User Manual

WARNING: When adding a sub-group to the tree list, sub-group
users will be blocked from Internet access until the minimum
filtering level profile is defined via the Minimum Filtering Level
window. The minimum filtering level is established by the global
administrator.

Add Individual IP

Add an Individual IP Member

From the group menu:
1. Click Add Individual IP to open the Create Individual IP
2. Enter the Member Name for the Individual IP address.
NOTES: The name of the individual IP address must be less than
20 characters; cannot be "IP", "NT", or LDAP", and cannot
contain spaces. The first character cannot be a digit.
The following characters cannot be used in the name: "." (period),
"," (comma), ":" (colon), ";" (semi-colon), "!" (exclamation point),
"?" (question mark), "&" (ampersand), "*" (asterisk), """ (quotation
mark), "'" (apostrophe), "`" (grave accent mark), "~" (tilde), "^"
(caret), "_" (underscore), "|" (pipe), "/" (slash), "\", (backslash)",
"\\" (double backslashes), "(" (left parenthesis), ")" (right paren-
thesis), "{" (left brace), "}" (right brace), "[" (left bracket), "]" (right
bracket), "@" (at sign), "#" (pound sign), "$" (dollar sign), "%"
(percent sign), "<" (less than symbol), ">" (greater than symbol),
"+" (plus symbol), "-" (minus sign), "=" (equals sign).
8 6 T , R3000 E
E ECHNOLOGIES
G
ROUP
dialog box:
Fig. 3:1-23 Create Individual IP box
F U
NTERPRISE ILTER SER
A S
DMINISTRATOR ECTION
G
UIDE
C 1: G
HAPTER ROUP SCREEN
381