I Nstall The S Erver; Step 1: Preliminary Setup - 8e6 Technologies R3000 Mobile Quick Start Manual

i
nstall the

Step 1: Preliminary Setup

Create a "setup workstation" using a Windows-based laptop or desktop machine with a
network card and Internet Explorer 5.5 (or later). The setup workstation will be used for
accessing the R3000 server on the network and configuring the unit.
A. From the desktop of the setup workstation, follow the procedures for your machine
type:
• Windows XP - go to Start > Control Panel. Open Network Connections. Right-
click the link for LAN or High-Speed Internet and choose Properties.
• Windows 2000 - right-click the My Network Places icon and select Properties.
Right-click the correct Local Area Connection and choose Properties.
B. Click on Internet Protocol (TCP/IP) to highlight it.
C. Click the Properties button.
WARNING: Be sure to make note of the current network settings on the setup
workstation as you will need to return them for further setup procedures.
D. Choose the option Use the following IP address.
E. Type in the IP address of 1.2.3.1.
F. Type in the Subnet mask (netmask) of 255.0.0.0 and click OK.
G. Close the LAN connection properties box.
8
s
erver
8 6 M C Q S
e obile lient uiCk tart
G
uide