Specify Network Time Protocol Servers; Add An Ntp Server; Remove An Ntp Server - 8e6 Technologies R3000 User Manual

Enterprise filter

Hide thumbs Also See for R3000:

Table of Contents

DMINISTRATOR

YSTEM SCREEN

Specify Network Time Protocol Servers

In the Details frame, three NTP server IP addresses display

by default in the Servers list box. These IP addresses are:

128.59.35.142, 142.3.100.15, and 129.132.98.11.

NOTE: Any IP address following the first entry in the Servers list

box is only used in the event that the R3000 cannot access the

primary time NTP server specified. IP addresses are used in the

order in which they display in the list box.

To add an NTP server:

1. Enter the IP address in the NTP Server field.

2. Click Add to include this IP address in the Servers list

3. Click Apply to apply your settings.

To remove an NTP server:

1. Select the IP address from the Servers list box.

2. Click Delete.

3. Click Apply to apply your settings.

WARNING: If using the R3000 with the 8e6 Technologies Enter-

prise Reporter unit, be sure the ER unit is connected to the same

NTP servers as the R3000.