Invisible Option: Specify The Block Page Delivery - 8e6 Technologies R3000 User Manual

G A
LOBAL DMINISTRATOR
162
S C 1: S
ECTION HAPTER

Invisible Option: Specify the Block Page Delivery

The Block Page Delivery Method frame displays if the Invis-
ible operation mode was selected. Specify the block page
delivery method by making the following selection(s):
Choose from either of the two Protocol Methods:
• "Send Block Page via ARP Table" - this option uses the
Address Resolution Protocol method to find the best
possible destination MAC address of a specified host,
usually the R3000 gateway.
• "Send Block to Specified Host MAC Address" - using this
preferred method, the block page will always be sent to
the MAC address of a specified host, usually the R3000
gateway.
Using this option, choose from either of the two Block
Page Route To selections:
• "Default Gateway" - this option indicates that the
default gateway on your network will be used for
sending block pages. If the invisible mode is selected,
"Default Gateway" displays by default as the Block
Page Route To selection.
• "Alternate IP Address" - this option should be used if
block pages are not being served.
Enter the IP address of the router or device that will
serve block pages.
NOTES: The Current MAC Address displays if there is a resolu-
tion between the IP address and the MAC address of the router
or device used for serving block pages.
If an Alternate IP Address is used, that address must be resolved
with the MAC address in order for block pages to be served to
client PCs.
YSTEM SCREEN
8 6 T , R3000 E
E ECHNOLOGIES
F U G
NTERPRISE ILTER SER UIDE