Add The Ip Address Of The Member; Add The Mac Address Of The Member; Remove A Member From The Group - 8e6 Technologies R3000 User Manual

Enterprise filter

Hide thumbs Also See for R3000:

Table of Contents

DMINISTRATOR

Add the IP Address of the Member

If using the invisible or router mode:

1. Specify whether to add an IP address range with or

without a netmask by selecting either "Source IP" or

"Source IP Start / End".

• If "Source IP" was selected, enter the IP address, and

specify the netmask in the Source IP fields.

• If "Source IP Start / End" was selected, enter the Start

and End of the IP address range.

2. Click Add to include the IP address entry in the Current

Members list box.

TIP: Click Calculator to open the IP Calculator, and calculate IP

ranges without any overlaps. Enter the IP address, specify the

Netmask, and then click Calculate to display results in the Min

Host and Max Host fields. Click Close to exit.

If using the mobile mode:

1. Select "Source MAC".

2. Enter the member's MAC address.

3. Click Add to include the MAC address entry in the

Current Members list box.

To remove an entry from the Current Members list box:

1. Select the member from the list box.

2. Click Remove.